Heavy duty self-vulcanizing cold shrinking tape composed of 3 layers.

Available in 50, 75 or 100 mm width.

15 meters a roll.

With aluminium film

• Indoor or outdoor use on all kinds of ductwork to provide an airtight seal, a sure and long lasting moisture-proof barrier against weather influences.
• For maximum effect the surface must be clean and free of dust, moisture and other foreign contamination.
• Porous or fragile surfaces need pre-treatment.
• Storage in a properly ventilated room at a max. temperature of 30°C away from humidity.

• Vulcanizing adhesive tape with aluminium film.
• Temperature resistance -20°C>+70°C.
• Min. temp. for application 0°C.

• 3 layers: viscoelastic butyl adhesive laminated with aluminium film and a paper release liner along the adhesive side.
• Carrier: Aluminium 5/100 mm.
• Adhesive type: Butyl rubber 1 mm.
• Adhesion: 4 N/cm 90° angle on steel at 100 mm/mn.
• Resistance to flow:
  < 3mm at 5°C,
  < 3mm at 70°C.
• Temperature resistance:
  -30°C +80°C (permanent service temperature),
  +5°C +40°C (application temperature).
• Air pressure: max. 3500 Pa.
• Fire resistance: M1 classification.
• Length per roll: 15 m.
• Color: silver aluminium.

• The ductwork connection shall be sealed airtight by means of a self-vulcanizing cold shrinking tape, composed of 3 layers: viscoelastic butyl adhesive laminated with aluminium film and a paper release liner along the adhesive side. Fire resistance M1. Permanent service temperature between -30°C +80°C.
• ATC
• type ASB