LMF AluR is roll material consisting of strips (lamellas) cut from mineral wool slabs and glued onto the aluminium foil so that the fibres are perpendicular to the substrate plane.

• For thermal, acoustic and fire insulation of building structures, for the insulation of piping, air conditioning, ventilation and piping heating devices

• Mineral wool matress with vertical glasswool lamellas, glued on a reinforced aluminium foil of 20 µ thickness.

• Yellow mineral glasswoll with reinforced aluminium foil

• Mineral glass wool matress with vertical glasswool lamellas
• Reinforced aluminium foil of 20 µ thickness.
• Wrapped in polyethylene shrinkfoil

• Heat conductivity of 0.040W/mK at 10°C and volume mass ≥ 35kg/m³
• Application temperatures up to 600°C by a surface temperature lower than 100°C
• Distinguished by the increased compressive strength and preserves its standard thickness when compressed
• Micro-organism and rodent-resistant
• Chemically neutral: it does not increase the corrosivity in case of the direct contact with metal
• Adapted easily to structures of various shapes
• Hyrdrophobed
• Fire resistance class A2 – s1, d0 according to EN 13 501-1

• To be glued on ducts and to be finished with aluminium tape
• To be wrapped around ducts and to be finished with aluminium tape
• To be pinned on duct surfaces by means of insulation pins with washers

• POWER SPRAY contact glue
• ALUTAPE 40 or reinforced aluminium tape FSK  
• CDC 32 insulation self-adhesive pins with washers
• SPC 32 solder pins with washers

• LMF AluR is roll material consisting of strips (lamellas) cut from mineral wool slabs and glued onto the aluminium foil so that the fibres are perpendicular to the substrate plane.

• ATC Type LMF AluR

• LMF AluR 30

Explanation

LMF AluR = Mineral wool insulation on roll

30 = in 30mm thickness