Smoke and heat extractor fans with a flow rate from 300 to 18,000 m3/hr

• Extraction of fumes from fire. The range consists of 10 types for flow rates up to 16000m3 / h
• Also suitable for extraction of fumes from kitchen, car parks and industrial premises
• The REFLEX conforms CTICM F400-120 and EN12101-3

• Base: in square-section heavy gauge galvanized steel sheet with a stamped out intake cone.

  Fixing hole on each corner

• Structure: supporting frame in aluminium with lifting rings fixed at the ends

• Motor fan support: galvanized steel plate strengthened by raised edges

• Fan: galvanized fan with backward-swept blades (high performance and easy to clean), statically balanced. Aluminium hub

• Motor: Protection IP55 class F

  - 230V, AC, single phase motor with permanent condenser.

  - 1 speed 230/400V AC three-phase motor.

  - 2-speed, 400V AC three-phase motor, Dahlander winding (4/8) independent windings (4/6)

• Motor cover: in RAL 7035 pre-lacquered 10/10 metal sheet - fitted with motor ventilation louvers. Location provided for padlockable switch, mounted as standard

• Protection meshes: in galvanized steel

• REFLEX H: Horizontal version, fitted in addition with a shutter system in RAL7035 prelacquered aluminium providing acoustic attenuation by virtue of a band fixed around the periphery in very high density 25mm - 120 kg/m3 mineral wool
• REFLEX V: Vertical version fitted in addition with a vertical outlet kit with 4 fixed faces insulated as standard with very high density 25 mm - 120 kg/m3 mineral wool to provide powerful acoustic attenuation