Condenserless units for production of cooling water with rotary and hermetic scroll compressors, R407C, cooling capacity 4 -205 kW.

Inside units (split) for HVAC applications like hospitals, shopping center, hotels, offices, ...

• R407C refrigerant.
• Hermetic Rotary compressoren (018 - 030) and hermetic Scroll compressoren (040 - 600).
• Electrical supply: 230/1/50 (from 018 to 040) and 400/3/50 (from 050 to 600).
• Microprocessor control.
• Stainless steel plate evaporator (copper braze welded).
• Protection grade IP22.

• High and low pump head pressure (except 018 - 040)
• Pressostatic valve kit

• Liquid solenoid valve

• Precharged with refrigerant

• Chiller refrigerant in/out valves

• External hydronic group
• Remote control kit
• Serial communication module
• Phase monitor kit
• Rubber antrivibration dampers

• The watercooled chillers are available on R407C - R410A - R134A.
• The range of watercooled chillers is going from 4 till 1406 kW.
• “Ocean/ME" is the smallest watercooled chiller in the range. The total range is available on our  website http://www.airtradecentre.com (Products - J - J03).
• Also on our website you can find the total range of fan coil units and watercassettes. Selection, documentation and prices are also for this products available on demand.

OCME-600

Explanation

OCME = OceanME type

600 = size, see table 

EUROVENT certificated, condenserless units are water cooled, with hermetic compressors rotary type 

and scroll. The series are available with one cooling circuit and one

compressor, with one cooling circuits with tandem compressors

with two cooling circuit and one compressor. Every unit is controlled by a

microprocessor. This microprocessors management all the main functions,

e.g. alarms and setting. All the models have a IP22 protection rating,

suitable for indoor installations. The refrigerant gas utilized is R407C.

The condensers and the evaporators, for all machines, are heat

exchangers stainless steel plate-type. Condenserless version are

supplied without condensers and are predisposed refrigerant valve

before IN/OUT freon connections (freon is pre-charged). Power supply are 230/1/50 and

400/3/50. All units are made with high quality, top brand name

components and were designed, produced and tested in compliance

with ISO 9001 standards.

The standard product, destined for EU and EFTA countries, is subject

to the following directives:

- electromagnetic Compatibility Directive 89/336;

- machinery Directive 89/392 et seq (91/368, 93/44 and 93/68);

- low Voltage Directive 73/23;

- pressure Equipment Directive 97/23/EC.

The electrical cabinet is constructed in compliance with CEI EN

60335-1.