Indoor ceiling fan coils cassette type 900 x 900mm, for coolng and/or heating with water

• Galvanized steel sheet, with thermal-acoustic insulation: lining (polystyrene) external cladding (close cells)

• Complete with external brackets on the corners for easy fixing to the ceiling

• Set-up for distrubution of air to adjacent rooms through knock-out, either circular dia 150 mm or rectangular 120 x 80 mm

• Set-up for fresh air intake through, circular dia 120 x 80 mm knock-out hole lacated on a squared of corner of the unit

• ABS grill 900 x 900mm (RAL 9010)

• Condensate pump

• Blower section with centrifugal fans, statically and dynamically balanced horizontally-oriented aluminium impellers

• Single-phase asynchronous electric motor with overload cutout, 4 speeds

• The airfilter is fixed in the inner part of the grill

• The heat exhanger are made of copper pipes expanded in aluminum fins, with female fittings and air vents, connection left or right following demand

• 2 or 4 pipes
• With infra red control or wall mounted controller

• Fresh air intake
• 2 way or 3 way valves
• On/off or mudulating motor 230 or 24V

HCV4S-32N/IR

Explanation

HCV4S= Cassette unit 900 x 900

3 = 2 pipe unit if  5 = 4 pipe unit 

32N = size, see table

IR = with infrared remote control, M = for wall remote control

EUROVENT certificated unit with nice,  intelligent, modern grill. Standard white (Ral 9010). Made of ABS, protected against corrosion and chemicals. Easy installation.

Central grill for air intake and 4 sides manual adjustable fins for outlet.

The unit is build up out of thick galvanized steel plate with internally thermo- acoustic insulation (M1). Occasional connection of extra duct is possible by opening of 120 x 80mm. For fresh air 120 x 80mm  is availble.

The units have dimensions of 835 x 835mm hight 240 or 305mm (HCVN).

The condensate pump includes a floater and anti-retour valve. Statistic pressure = 1m : 230V-1Ph-50Hz.

The high efficient coil is build up out of copper tubes with alu fins. And includes air vent and draining vent.

The fan section has 1 centrifugal fan, made out of ABS immediately connected on the electrical motor. Mounted on elastic and anti vibrating supports. The total section is balanced and low noise level.

The motor has 4 speeds. Provided of an heat protection (Klixon). Produced following internationale standaard, 230V/1Ph/50Hz en geluidsarm.

The easy replaceable filter, is place in a ABS frame and can be cleaned by water an/or air.